Featured Photo: Streamer Eater on the Clinch

Featured Photo: Streamer Eater on the Clinch

Saturday, December 19, 2020

Tying and Fishing David Knapp's PB&J Streamer [VIDEO]

The Motivation Behind the PB&J Streamer

Flies usually come about as the result of either a problem that needs solved or a wild night at the tying bench. Occasionally, both reasons are responsible. When it comes to tying streamers, I've experimented a lot at the vise over the years. I went through an articulated streamer phase. More recently, I've focused on jig style streamers. However, the first killer streamer I came up with was invented quite some time ago.

Over ten years ago, I got addicted to stripers for a couple of years. My good friend Trevor got me started on them and soon we were catching enough to keep us going back. This was back in my teaching days. I would teach all day, go striper fishing at night, sometimes until midnight or after, then make the long drive back home to get up and get to work by 7:00 am. I'm mostly past the staying out late every night stage, but the memories are good ones. 

Late in that first season of striper fishing, we encountered an interesting situation. Smaller threadfin shad were swept through the turbines of the dam at one of our favorite striper spots. The big stripers would set up shop downstream and we would find them sipping shad much like a big rainbow might sip a mayfly. When I say big stripers, I mean fish in the 15-30 pound range. While we have much larger stripers around, those were huge to us. I needed a fly that was weighted and looked like those dead and dying shad. The main purpose was a fly that could be used for sight fishing when these big stripers set up just under the surface to gorge on shad. Enter the PB&J streamer.

The Design Process for the PB&J Streamer

When I got home and set out to tie a great shad streamer, I remembered that my good friend Byron Begley of Little River Outfitters preferred tying shad with EP (Enrico Puglisi) fibers. His EP shad were and still are killer. The only problem is that they were tied weightless and I wanted something with weight that could quickly get down 1-3 feet under the surface without a sinking line to target those big stripers that were sipping shad. 

At that time, I tied very few streamers without some zonker strips. The natural movement of the rabbit fur is killer in any type of streamer. Thus, I combined the best of a couple of patterns. With Byron's EP shad providing the basis for the shape of the fly, I took the wing of a Zonker or similar style fly for extra movement and added dumbbell eyes like a Clouser. Instead of tying the eyes in on top like the Clouser, I found that this fly was easier to tie with the eyes on the bottom which eliminated threading the zonker strip over the hook point. Also, for whatever reason, I found that I was getting better hookups on stripers with the hook point riding down. Add a splash of color (the jelly in PB&J) as a trigger, and the PB&J streamer was born. 

Find the recipe for the PB&J HERE.

Tying the PB&J Streamer

Learn how to tie the PB&J streamer here with this video I put together. Let me know if you have any questions about tying this fly! 




Fishing the PB&J Streamer

This fly came together fairly quickly. Once I had the design down, it was a matter of learning if the fish would like it. That part turned out to be easy. The big stripers it was designed for loved the fly! In fact, I was soon catching more and larger stripers with this streamer. When sight fishing with this fly, I would use a basic 20 lb and 12 lb leader setup. You don't want to get much lighter than 12 lb test because the stripers will really put it to work hard. The key was to locate a feeding striper, then toss this fly 3-5 feet up current from the fish and let it dead drift down. More often than not, the fish would eat. 

Over time, this fly accounted for plenty of stripers along with a lot of random bycatch. I caught sauger, walleye, drum, white bass, largemouth bass, and of course trout on this fly. As I've become more and more interested in fly fishing the shad kill on area rivers, I've focused more and more on trout over the last few years. Ultimately, while I love catching stripers and other fish, trout are my target species of choice and what I keep coming back to again and again. As it turns out, this fly is deadly during the shad kill on trout tailwaters as well. 

You can fish this fly several different ways. One way is to fish it under a large indicator dead drift. You can also tie it on a short leader on a sinking line and strip the fly back to the boat. If you are stripping a PB&J during the shad kill, I recommend focusing on swimming the fly slower, not faster. Imitating the dead and dying shad, you should remember that the natural bait in the water is generally just drifting in the current or maybe twitching a little. Either way, it isn't moving fast through the water. Another good method is to cast upstream on a sinking line and let it just sink as you drift downstream. This technique is risky as you have a good likelihood of snagging bottom. It is usually a matter of if a fish eats before it snags. However, letting it run along the bottom at nearly a dead drift is often deadly. 

When fish are mostly focused high in the water column as often happens during the shad kill, try this streamer on a floating line with a 9 or 10 foot leader ending in 1x. The floating line keeps the fly from getting too deep and under the view of feeding trout. 


Variations on the PB&J Streamer

Over the years, several variations on the original PB&J have also been successful. First and foremost, you can try straying from the original white colors. This thing works in a lot of different color schemes to match various baitfish. Another variation that I really like is to use buck tail instead of EP fibers for the bottom. This gives a much more slender fly that matches various shiners and other baitfish well. Tie the buck tail in just like you would for a Clouser. 

Perhaps the most successful small variation on the original fly is to simply alter the weight. Use smaller dumbbell eyes and maybe tie the pattern itself a bit smaller, say #4 or even #6. This makes a perfect dropper for fishing behind your favorite floating shad. 

Finally, have fun with this fly! Let me know how it works for you and also what interesting variations you come up with. 

No comments:

Post a Comment