Tying and Fishing David Knapp's PB&J Streamer [VIDEO]

The Motivation Behind the PB&J Streamer

Flies usually come about as the result of either a problem that needs solved or a wild night at the tying bench. Occasionally, both reasons are responsible. When it comes to tying streamers, I've experimented a lot at the vise over the years. I went through an articulated streamer phase. More recently, I've focused on jig style streamers. However, the first killer streamer I came up with was invented quite some time ago.

Over ten years ago, I got addicted to stripers for a couple of years. My good friend Trevor got me started on them and soon we were catching enough to keep us going back. This was back in my teaching days. I would teach all day, go striper fishing at night, sometimes until midnight or after, then make the long drive back home to get up and get to work by 7:00 am. I'm mostly past the staying out late every night stage, but the memories are good ones. 

Late in that first season of striper fishing, we encountered an interesting situation. Smaller threadfin shad were swept through the turbines of the dam at one of our favorite striper spots. The big stripers would set up shop downstream and we would find them sipping shad much like a big rainbow might sip a mayfly. When I say big stripers, I mean fish in the 15-30 pound range. While we have much larger stripers around, those were huge to us. I needed a fly that was weighted and looked like those dead and dying shad. The main purpose was a fly that could be used for sight fishing when these big stripers set up just under the surface to gorge on shad. Enter the PB&J streamer.

The Design Process for the PB&J Streamer

When I got home and set out to tie a great shad streamer, I remembered that my good friend Byron Begley of Little River Outfitters preferred tying shad with EP (Enrico Puglisi) fibers. His EP shad were and still are killer. The only problem is that they were tied weightless and I wanted something with weight that could quickly get down 1-3 feet under the surface without a sinking line to target those big stripers that were sipping shad. 

At that time, I tied very few streamers without some zonker strips. The natural movement of the rabbit fur is killer in any type of streamer. Thus, I combined the best of a couple of patterns. With Byron's EP shad providing the basis for the shape of the fly, I took the wing of a Zonker or similar style fly for extra movement and added dumbbell eyes like a Clouser. Instead of tying the eyes in on top like the Clouser, I found that this fly was easier to tie with the eyes on the bottom which eliminated threading the zonker strip over the hook point. Also, for whatever reason, I found that I was getting better hookups on stripers with the hook point riding down. Add a splash of color (the jelly in PB&J) as a trigger, and the PB&J streamer was born. 

Find the recipe for the PB&J HERE.

Tying the PB&J Streamer

Learn how to tie the PB&J streamer here with this video I put together. Let me know if you have any questions about tying this fly! 

Fishing the PB&J Streamer

This fly came together fairly quickly. Once I had the design down, it was a matter of learning if the fish would like it. That part turned out to be easy. The big stripers it was designed for loved the fly! In fact, I was soon catching more and larger stripers with this streamer. When sight fishing with this fly, I would use a basic 20 lb and 12 lb leader setup. You don't want to get much lighter than 12 lb test because the stripers will really put it to work hard. The key was to locate a feeding striper, then toss this fly 3-5 feet up current from the fish and let it dead drift down. More often than not, the fish would eat. 

Over time, this fly accounted for plenty of stripers along with a lot of random bycatch. I caught sauger, walleye, drum, white bass, largemouth bass, and of course trout on this fly. As I've become more and more interested in fly fishing the shad kill on area rivers, I've focused more and more on trout over the last few years. Ultimately, while I love catching stripers and other fish, trout are my target species of choice and what I keep coming back to again and again. As it turns out, this fly is deadly during the shad kill on trout tailwaters as well. 

You can fish this fly several different ways. One way is to fish it under a large indicator dead drift. You can also tie it on a short leader on a sinking line and strip the fly back to the boat. If you are stripping a PB&J during the shad kill, I recommend focusing on swimming the fly slower, not faster. Imitating the dead and dying shad, you should remember that the natural bait in the water is generally just drifting in the current or maybe twitching a little. Either way, it isn't moving fast through the water. Another good method is to cast upstream on a sinking line and let it just sink as you drift downstream. This technique is risky as you have a good likelihood of snagging bottom. It is usually a matter of if a fish eats before it snags. However, letting it run along the bottom at nearly a dead drift is often deadly. 

When fish are mostly focused high in the water column as often happens during the shad kill, try this streamer on a floating line with a 9 or 10 foot leader ending in 1x. The floating line keeps the fly from getting too deep and under the view of feeding trout. 

Variations on the PB&J Streamer

Over the years, several variations on the original PB&J have also been successful. First and foremost, you can try straying from the original white colors. This thing works in a lot of different color schemes to match various baitfish. Another variation that I really like is to use buck tail instead of EP fibers for the bottom. This gives a much more slender fly that matches various shiners and other baitfish well. Tie the buck tail in just like you would for a Clouser. 

Perhaps the most successful small variation on the original fly is to simply alter the weight. Use smaller dumbbell eyes and maybe tie the pattern itself a bit smaller, say #4 or even #6. This makes a perfect dropper for fishing behind your favorite floating shad. 

Finally, have fun with this fly! Let me know how it works for you and also what interesting variations you come up with. 

First Night in Glacier National Park

While I have visited Yellowstone National Park many times, I had never made the trek further north to Glacier National Park, until this summer that is. This last summer was a strange time to travel to say the least, but my wife and I were not going to be deterred. Our trip was modified significantly, of course, due to COVID-19. Neither of us had ever been to Glacier, so in some ways we don't really know for sure what we were missing out on. However, we were able to experience many amazing elements of one of the most beautiful national parks I have ever visited. 

The trip was in the works since 2019 and we had at least been talking about it longer than that. As we started to enter the window to make reservations for camping, I stressed and put forth a lot of time and effort. You see, camping reservations for Glacier National Park are difficult to obtain. For example, the reservations were released on a rolling basis 6 months in advance. Sites would literally book within seconds. If you were not online and ready to hit reserve at the exact moment the reservations were released, you could forget about it. 

In the first round of reservation availability, I snagged a campsite at Fish Creek for our first two nights, but failed to reserve anything beyond that. I tried day after day to get a campsite at Many Glacier, but it was not to be. Three months later, the second half of the campsites were released. By some miracle, I actually snagged a site for four nights at Many Glacier. The trip was starting to come together. Then COVID hit.

One of the first changes to our itinerary was when Glacier National Park announced that Many Glacier would stay closed for the duration of the 2020 season. In fact, there would be no access to the east side of the Park at all. While this seemed a bit absurd, there wasn't anything to be said or done. We debated cancelling our trip and trying again in 2021, but I knew this would be a great year to travel in terms of costs with gas prices so low. Finally, we did a bit of Google searching and found an alternative. Glacier Campground is a private campground just outside the west entrance to Glacier, and lo and behold, they still had some availability for the time we would be there!

We went ahead and booked a full week at Glacier Campground. Our trip plan involved a little over a week total at Glacier, then a jump over into northern Idaho for some more camping and fishing. My wife is super gracious and readily agrees to me getting some fishing in on these trips. A bull trout was on my bucket list and northern Idaho seemed like a good place to check it off without leaving the country. First, however, we had to get to Glacier National Park and enjoy some time there. 

Fast forward a few months, and our departure finally arrived. We took a northern route through Minnesota and North Dakota because I wanted to check another state off of the list. There's only a small handful I haven't visited. Time for an Alaska trip! 

While traveling through ND, we had to stop in Theodore Roosevelt National Park. One of my all time favorite presidents, Theodore Roosevelt spent quite a bit of time in the badlands of North Dakota and was inspired to start the conservation movement based largely on his time there. We were fortunate to spot some bison and enjoyed a great sunset. No trip out west would be complete without seeing some bison!

The next day, all that separated us from Glacier National Park was the state of Montana. We headed off on Montana 200S which features two lanes and a 70 mph speed limit. One of my favorite things about the wide open spaces out west is the ability to make some serious time. With 80 mph speed limits on the interstates and 70 mph speed limits elsewhere, Montana is a great place to make haste. The only downside is that it is a massive state. We soon learned why the speed limits are so high. People have to hurry if they want to get anywhere!

We finally made it to Great Falls where we stopped for lunch. One strange thing about this trip was the lack of eating out. Because of COVID, we were being cautious. We didn't want to ruin our trip with a mysterious illness or anything. However, pizza was sounding really good and we reasoned that since it was cooked at 500 degrees or something similar, it was probably safe. We called and ordered takeout which worked out fine. We were still healthy and enjoyed some excellent pizza from Fire Artisan Pizza. A stop for groceries and gas and we were back on the road with Glacier in our sights. 

We took highway 200 to highway 83 which then made a beeline for the West Glacier area. Highway 83 ended up being a beautiful drive through gorgeous forests. We had to watch out for deer as several ran across the road including some impressive bucks. Thankfully we avoided any collisions and made it to Glacier around sunset. It had been a long day, but we were finally there!

Setting up camp quickly in the waning light, we had supper and then headed out to look for a spot to do some nighttime sky photography. Comet NEOWISE was fading fast, and I hoped to catch it over Lake McDonald. As it turned out, the comet was too dim to show up in large scale pictures of the lake, but I did manage some nice night sky pictures of the lake and stars along with a few closeups of the comet. Finally, we decided it was best to head back to camp and get some rest. The next day would be our first full day in Glacier and we didn't want to waste time sleeping!

Post Spawn Smoky Mountain Brown Trout

The fall brown trout spawn has recently wrapped up for another year. Things seemed a bit later than usual, although there were fish spawning by the first or second week of November. This is a time of year to use extra care while wading and fishing. Spawning fish should be allowed to do their thing in peace. After the fact, it is essential that anglers avoid wading on the redds. Doing so will crush the eggs that were deposited there and severely impact the next generation. They already have enough challenges in reproducing. 

After the spawn is over, the fish feed heavily as we move into the winter months. The fish are trying to regain body mass after the rigors of spawning. This can be some of the most exciting fishing of the year but also perhaps some of the most miserable. That is because the weather often leaves a lot to be desired.

Last week, I had a free day and decided to go fishing for myself. The day started out perfectly and just got better from there. The sky was threatening snow, and snow days have been some incredible producers for me in the past. The temperature started in the low 40s and fell throughout the day. 

The first caught fish of the day was one I spotted on my second or third stop. I was looking as much as fishing at this point. However, when I noticed a hefty brown trout holding near the back of a quality run, I couldn't resist fishing. 

I had been walking and looking without a rod. This is a sure way to guarantee that you actually spend time looking, not fishing. After spotting the fish, I took the time to walk back to the car and rig up appropriately. A big black wooly bugger seemed like the right idea, and I added a worm as a dropper. Winter fish really like both of those flies for whatever reason. 

Back on the water, I took a minute to find my fish again. Sure enough, it was still hanging out in the same general area. I noticed that it ate something drifting by and started to feel the excitement surge. This was a feeding fish and feeding fish are catchable fish. Clambering down the bank took some doing. I dealt with a bum ankle for part of November and wasn't interested in aggravating the high ankle sprain again. Thankfully, each step on the slick leaves held, and I was soon standing on the stream bank. Sneaking upstream along the bank, I reached the point where I would begin my stalk. 

The fish was sitting in a nearly perfect spot, not too far above a large mid stream boulder. Cover like this can make or break a stalk of a big brown. In my case, the fish never knew I was coming because of the ability to sneak in behind the rock. Once I arrived in position, it was time to actually execute. This is NOT the moment to rush. Do everything right, and you catch the fish. It is that simple most of the time. Rushing is probably the quickest way I know to blow a good fish. I've done it many times in fact...

My leader was quite long, enabling me to keep the fish from seeing the fly line. I was using a 10' 3 weight Orvis Recon. The extra reach was going to be critical to keeping the leader and line from getting pulled through the riffle below the run before the fish had time to find the flies. Working out the leader and then some line, I false cast a couple of times to judge the distance. Then I slung all the flies in the riffle below me. I like to water load these casts. It helps to guarantee where the flies are going on the presentation cast. 

Taking a deep breath, I knew that it was time. I quickly made a casting stroke under some low hanging branches and the flies landed a few feet upstream of the fish. My flies were perfectly visible in the clear water. I watched as the brown trout slid to his left and ate the wooly bugger. With just a slight hesitation to let him close his mouth, I gave a strong hookset and couldn't believe when the fly stuck. Some days you just get lucky. I'm always leery of first cast fish, but if they are this quality, then I'm glad to get skunked the rest of the day. On this day, however, things would only get better...

The fight was relatively quick. The flex in the 10' rod allowed me to push the fish hard on the 4x tippet. In what seemed like no time, I had the fish in the net and ready for a couple of pictures. The main reason I carry a large net is to keep fish healthy in between pictures, and I wasn't taking chances with such a gorgeous brown trout. Just a quick lift and snap, and I had the memory. 

While I didn't know it at the time, this would be the first of many fine brown trout on the day. More about that next time... In that moment, though, I just sat down on the bank and took it all in. Big brown trout are always a treat and this one was a beauty.